 |
This is a good waveform |
 View larger image
 Download this waveform file for use with PicoScope
Cranking Amps (Petrol Engine) Waveform Notes
The purpose of this particular waveform is two fold:
- To measure the amperage required to crank the engine.
- To evaluate the relative compressions.
The amperage required to crank the engine will largely depend on many factors, hese include: the capacity of the engine, the number of cylinders, the viscosity of the oil, the condition of the starter motor, the condition of the starters wiring circuit and the compressions in the cylinders.
Once the engine is rotating, the current for a typical 4 cylinder petrol engine is in the region of 80 - 200 amps. As can be seen from the initial peak of current drawn, the current required by the starter motor to begin to rotate the engine from rest can be two or three times higher than when rotating.
The compressions can be compared against each other by monitoring the current required to push each cylinder up on its compression stroke. The better the compression the higher the current demand and vice versa. It is therefore important that the current draw on each cylinder is equal. This test is only a comparison against each cylinder and is not a substitute for a physical compression test with a suitable gauge.
NOTE: when compression testing a petrol engine it is advisable to isolate the ignition primary circuit to avoid damage to the electronic circuitry.
汽車診斷 | 汽車診斷儀 | 汽車故障診斷儀 | 汽車測試儀 | 汽車分析儀 | 汽車診斷示波器 | 汽車電路測試儀 | 汽車電路分析儀 | 發動機分析儀 | 發動機綜合分析儀 | 發動機檢測中心 | 點火分析儀 | 點火測試儀 | 汽車傳感器測試儀 | CAN總線示波器 | LIN總線示波器 | 汽車故障記錄儀 | 汽車傳感器分析儀 | 汽車檢測儀 | 噴油嘴測試儀 | 點火線圈測試儀 | 蓄電池測試儀 | 發電機測試儀 | 起動機測試儀 | ABS傳感器測試儀 | ECU測試儀 | ECM測試儀 | 進氣真空/壓力測試儀 | 排氣壓力測試儀 | 汽車技術培訓 | 爆震傳感器測試儀 | 缺火測試儀 | 缺缸測試儀 | 線路測試儀 | 引出線 | 汽車數字示波器 | 真空傳感器 | 高壓感應測試頭 | 無分電器點火測試頭 | 獨立點火（COP）感應測試頭 | 漏電測試儀 | 氣缸相對壓縮測試 | 電腦測試儀 | 發動機控制器測試儀 | 泄漏測試儀 | 熒光檢漏 | 超聲波檢漏 | 汽車數字萬用表 | 電流鉗表 | 電流勾表 | 點火正時燈 |
